Home > Tree Root Barrier by NDS >

NDS EP-1250 Tree Root Barrier Panel, 12-Inch by 24-Inch - Carton - 50 Panels
NDS Tree Root Barrier Panels


 
Alternative Views:


Our Price: $442.22


Product Code: EP-1250
Qty:

Description
 

NDS 12" x 24" Tree Root Barrier Panels

  • Model: EP-1250
  • Size: 12" x 24"
  • Panel Thickness: 1/8"
  • Linear Feet Per Carton: 100
  • Panels Per Carton: 50
  • Made in the USA



FREE SHIPPING


NDS Root Barrier Shipping Time:

NDS orders typically ship same day if the order is placed before 12:00 noon EST. Transit times displayed in the map are listed in business days, are approximate and are specific to this model number only. Transit days can increase up to a total of 5 business days if low stock is experienced at your closest warehouse (this is vary rare). The day that the order is shipped is not counted as a transit day.

The transit times displayed on the map are for standard ground shipping.



Panel Sizes Available:

Root Barrier Panel Sizes
12" Height
18" Height
24" Height
36" Height

Heavy-Duty Root Barrier

EP Series Root Barriers are injection molded High Impact Polypropylene (HIPP) modular root barrier panels, with a unique factory installed joiner strip that eases installation. EP Series Panels include a "T" top edge to prevent root overgrowth and an external flange at the base to lock panels in the ground.

Included joint pieces provide a secure connection between panels

Surround Applications:

EP Series Root Barriers can be installed in either a linear or surround configuration. The panels are flexible allowing for the installer to completely surround the tree root base.

Caution:

It is recommended that smooth "Bamboo Barrier" is not used as a tree root barrier. Smooth barrier does not feature vertical ridges which are essential in directing tree roots downward. When tree roots grow toward the surface the roots can attempt to "jump" the barrier creating a future maintenance issue. Additionally shallow roots can impair the stability of the tree.




Linear Applications:

In a linear application, the tree root barrier should be installed per the directions below:

1. Before the tree is planted, connect the root barrier panels to a length of 6 feet. If multiple trees or a row of trees are to be planted, be sure to allow the barrier to extend at least 3 feet to on either side of the first and last trees in the row.

2. Dig a trench along the sidewalk or patio centered on the planting site, 6 feet long and appropriately deep so the top of the root barrier will be 1/2" to 1" above the finished soil grade or flush with the level of the sidewalk or patio, whichever is lower.

3. Place the pre-assembled panels in the trench. Center the root barrier on the planting spot so it extends for 3 feet on either side of the tree trunk. Be sure that the ridges on the root barrier panels are facing the tree. Double check that the root barrier panels are 1/2" to 1" above the soil line.

4. Backfill while taking extra care to keep the root barrier in place.

Technical Information


EP Series Root Barrier Panels EP-1250 EP-1850 EP-2450 EP-3650
Download PDF

Catalog & Brochures

Landscape Catalog
Download PDF


Share your knowledge of this product. Be the first to write a review »