Click to Enlarge Photo Above
We Sell Genuine Typar GrassProtecta Only
Many online sellers of GrassProtecta offer a product which may look very similar to GrassProtecta sometimes at deeply discounted prices. These products are typically imported and the product specification, quality and durability may vary widely from the genuine Typar GrassProtecta product. If you are trying to meet a spec or are re-ordering to match existing material this could be a major problem.
When our customers order GrassProtecta we ensure that our customers receive the genuine product that they ordered manufactured by Typar. If you have any questions or would like a custom quote on GrassProtecta please call (800) 524-4161.
Please note we recommend the following quantities of U-Pins per roll:
6X65' rolls - 4 packs, 3x32' rolls - 2.5 packs (3 for a single roll)
GrassProtecta grass reinforcement mesh is a thick plastic mesh supplied on a roll that is installed directly onto existing grass to protect, reinforce and stabilize the grass against damage caused by traffic (pedestrians and vehicles.) Grass protection mesh protects grass that is prone to wear, rutting and muddy surfaces. GrassProtecta reinforces the grass for vehicle traffic (car and trucks) or for pedestrian paths and walkways. TYPAR Geosynthetic's GrassProtecta plastic mesh reinforcement has an oscillated mesh structure which is designed to increase grip and reduce slip.
GrassProtecta is a cost effective solution for:
GrassProtecta grass protection mesh is supplied on 6.56ft x 65.6ft & 3.28ft x 32.8ft rolls in two thicknesses 0.55 & 0.45 inches. The grass stabilization mesh is manufactured from high density polyethylene with about 20% of the polymer being from recycled materials and is fully recyclable.
TYPAR recommends that GrassProtecta turf protection mesh remains unused until the grass has grown through the plastic net apertures. This may take a few months (up to eight months) depending on the season and geographic location and allows the grass to fully grow through the mesh resulting in the grass blade / roots creating a strong interlock with the mesh strands. If the surface is used immediately grass growth may take a longer period of time and may limit the effectiveness of the mesh at reinforcing the surface.
GrassProtecta grass reinforcement grid provides:
GrassProtecta can be used in source control applications in accordance with Low Impact Design (LID) and National Pollutant Discharge Elimination System (NPDES) guidelines for water management and is the perfect alternative to impermeable paved surfaces where natural grassed traffic routes and driveways are preferred and where planning restrictions are applied or cost savings are being considered.
Click on the link below to download the GrassProtecta installation guide:
Download GrassProtecta Installation Guide >
GrassProtecta After Installation
GrassProtecta with Full Vegetated Grass Growth
Typically ship within 4 days of order placement. Transit times range from 1-7 business days depending on location. GrassProtecta orders are shipped via freight.
Click here to visit Typar.com to download CAD detials