CELL-TEK Geocell Ground Grid Paver - LSG-3
Square Footage Per Grid: 215
Cell Dimensions (LxW): 10.2" x 8.8"
Load Rating: 8,000 lbs (Cars & Pickup Trucks)
Volume pricing available on orders over $7,000
Would You Like a Written Quote?
Fill With Gravel, Sand, Dirt or Grass
The LSG series grid can be filled with a variety of different infill types. You can build a reinforced grass driveway, strong gravel surface or a dirt area which is resistant to erosion. The possibilities are endless!
No Gravel Base Required!
The LSG series does not require a gravel base. This is due to both the depth and amount of compaction which takes place within the confined cells. Simply lay an approved geotextile below the grid and fill. The result is a savings in both labor and material cost.
Fabric for Beneath LSG Grid (Required)
It is required that a layer of geotextile fabric is placed below the LSG grid to prevent the gravel from absorbing into the ground. The recommended DuPont fabrics are non-woven geotextiles which provides strength and excellent drainage.
View Fabric Options & Other LSG Accessories >
LSG SERIES LOAD SUPPORT GRID provides superior support to your pavement system. The system confines materials and prevents lateral movement away from the applied load. The stabilizer grid acts as a large mat, by spreading the load over an extended area while increasing the load bearing capacity of the pavement surface.
Overflow Parking Areas
Fire Access Lanes
Golf Cart Paths
Roadside Shoulder Reinforcement
Ports & Marinas
Trails & Pathways
Pavement Base Support
Permeable Paver Support
Reduce Base Thickness up to 50%
Reduce Subgrade Stress
Reduce Installation Cost
Reduce Stormwater Runoff
Natural Recharging of Groundwater
Capture Airborne Pollutants
Safely Distributes Car Oil Leakage
Reduce Hot Surface Temperatures
LSG-6 (6 inch cell depth) infilled with
#57 stone with a 1" wearing layer can
provide 2.8" of rainwater storage.
EARN LEED BUILDING CREDITS:
Reduced Site Disturbance - Heat Island Effect
Recycled Material Content - Stormwater Management
• ACCESS ROADS
• GRAVEL PARKING LOTS • PORTS & MARINAS • BOAT RAMPS • FIRE ACCESS LANES • RV PARKING
BONDED AGGREGATE SURFACE
• WALKWAYS & PATHS
• PATIOS & COURTYARDS • GOLF COURSES • TREE PITS • HISTORICAL SITES
PAVER LOAD SUPPORT
• PAVER BASE SUPPORT
• DRIVEWAY BASE SUPPORT • RETAINING WALL SUPPORT • BASE REDUCTION SYSTEM
(VEGETATED / TURF)
• OVERFLOW PARKING
• GREEN PARKING SPACES • GREEN ROOFS • VEGETATED GROUND COVER
Download a printable version of the LSG Series Grid Installation Guide
Mud Management Installation Guide
Download a printable version of the LSG Series Grid mud management installation guide
Download a printable version of the LSG Series Product Brochure
Mud Management Case Study
View a case study from a customer who installed the LSG to solve a problematic muddy area in their landscape
Geocellular Confinement takes infill materials and produces a stiff base by creating a semi-rigid slab. The system prevents the lateral displacement of infill materials which eliminates rutting and washboarding usually associated with gravel pavements. The system allows for a reduction in overall base thickness, as well as enabling subgrade materials to withstand more than 10 times the number of cyclic load applications, without the appearance of deflection when compared to unconfined aggregates. GCS allows for the use of lower quality infill materials in situations where quality aggregates are not readily available and helps to create pavements on soft soil subgrades. When it comes to load support in porous paving applications, Cell-Tek's LSG SERIES delivers the competitive advantage.
TYPE OF TRAFFIC
Heavy Trucks &
Axle Loads: 18kN
Axle Loads: 75kN
Axle Loads: 145kN
Normal Hard Surface
Normal Hard Surface
Normal Hard Surface
SURFACE WEAR LAYER (overfill)
TOTAL SYSTEM THICKNESS
GEOTEXTILE (filtration & separation)
EQUIVALENCY TO UNCONFINED GRAVEL
12" - 14"
16" - 20"
24" - 30"
Expanded Grid Dimensions
9' X 23.92' (215SF)
Nominal Cell Dimensions
9.9" x 9.9" x Cell Depth
Packaged Dimensions Per Grid
24" x 54" x Cell Depth
Packaged Dimensions Full Pallet
48"W x 54"D x 40"H
Collapsed Grid Length
Polymer; virgin HDPE Density: 0.9574g/cm3
Normal Sheet Thickness
Environmental Stress Cracking
Hindered amine light stabilizer (HALS) 1.0% by weight
Short Term Seam Peel Strength
Long Term Seam Peel Strength
A 100mm (4 inch) wide section sample shall support a (160 lb.) load for a period of 7 days (168 hrs.) minimum in a temperature controlled environment undergoing a temperature change on a 1 hour cycle from ambient room temperature to (130F)
Weight Per Grid
Units Per Pallet
SF Per Pallet
EXPANDED GRID 9' x 23.92' (215 SF)
LSG Series Grid Shipping Time:
LSG grid orders typically ship same day if the order is placed before 12:00 noon EST. Transit times displayed in the map are listed in business days, are
approximate and are specific to LSG grid products only. The day that the order is shipped is not counted as a transit day.
The transit times displayed on the map are for standard ground shipping.
Additional Technical Information Downloads
POROUS PAVER w/ LSG SERIES
PROPER DRAINAGE w/ LSG SERIES
RESIDENTIAL DRIVEWAY w/ LSG SERIES
PERVIOUS SUPPORT SYSTEMFOR PERMEABLE PAVERS
REGULAR & POROUS PAVEMENT BASE STABILIZATION DETAIL (CONCRETE)
REGULAR & POROUS PAVEMENT BASE STABILIZATION DETAIL (ASPHALT)
NON-VEGETATED / POROUS PAVING(WITH J-HOOKS)
VEGETATED GREEN PAVING (WITH J-HOOKS)
SEAM TENSILE TESTING RESULTS
J-HOOK SPECIFICATIONS & PLACEMENT